H75Z
深孔機
球面,曲面,不規則之平面均能採用細孔深穴加工.
X, Y 行程
最大工作物
最大工件重量
外觀配置圖 (WxDxH)
淨重
700x550mm
1630x690x595mm
2600kg
3980x2007x2374mm
2980kg
機械規格
規格表
• Drill small diameter holes through hardened tool steel and carbide.
• Depth to diameter ratios>100(i.e.,.020 dia.>2" deep.)
• Enter on curved or angled surfaces.
• Dielectric is distilled water.
• 3-axis DROs.
• Edge finding and hole center finding.
• Inch/ metric switchable. • Z depth programmable.
• 99 built-in power settings plus operator programmed power settings (s-codes).
• Depth to diameter ratios>100(i.e.,.020 dia.>2" deep.)
• Enter on curved or angled surfaces.
• Dielectric is distilled water.
• 3-axis DROs.
• Edge finding and hole center finding.
• Inch/ metric switchable. • Z depth programmable.
• 99 built-in power settings plus operator programmed power settings (s-codes).
- 99 built-in power settings plus operator programmed power settings (S-codes)
H75Z
標準配件
- 導引頭 1.0mm - 1
- 銅管 1.0×400mm - 10
- 止水膠塊 1.0mm - 3
- 導引頭 0.5mm - 1
- 止水膠塊 0.5mm - 3
- 銅管 0.5×400mm - 10
- 工具箱 - 1
- 噴油組 - 1
- 過濾網(水)
選擇配件
- ER夾頭
- CE規格