English

G43F

Wire Cut EDM

1.High level of flexibility with low running cost.

2.The ideal machines for any EDM work shop.

3.In Submerged condition,maximum height of work-piece recommended is Z stroke minus 45mm.

Technical data

X, Y Axis Travel
U, V, Z Axis Travel
Max. Size of Workpiece
Max. Work Piece Weight
Outside Dimension (WxDxH)
Machine Weight
400x300mm
60x60x220mm
725x600x215mm
500kg
2450x2270x2100mm
2400kg

Specification

Model Unit G43F
X, Y Axis Travel mm 400x300
U, V, Z Axis Travel mm 60x60x220
Max. size of work piece mm 725x600x215
Max. work piece weight kg 350
X Y Feed Rate mm/min Max. 800
Axis Drive System - AC Servo Motor
Wire Diameter Range(Standard) mm φ0.15-0.3 (φ0.25)
Max. Wire Feed Rate mm/sec 300
Wire Tension gf 300-2500
Taper Angle - ±14.5°/80 (wide-angled nozzle, DA+DB=15mm)
Outside Dimension(WxDxH) mm 2200x2265x2130
Machine Weight kg 2800
Tank Capacity L 650

G43F

Standard

  • Paper Filter x 2PCS
  • Diamond Guides x 2PCS
  • Upper/Lower Flushing Nozzles x 2PCS
  • Energizing Carbides x 2PCS
  • Diamond Guide Remove Jig
  • Brass Wire (DIA.0.25mmX5kg)
  • Tools
  • AC Power
  • Alignment Jig
  • Flushing Ion Exchange Resins(1PCS x 3L)
  • Submerged Ion Exchange Resins(1PCS x 6L)
  • Auto Data Recovery after Blackout
  • Water Chiller (Flushing) x 1T
  • Water Chiller (Submerged) x 1T

Option

  • Swinging Panel
  • 2-in-1 Transformer + AVR
  • Auto Wire Threading(AWT)
  • 30kgs Wire Feeder
  • Auto Wire Chopper(30kg)
  • DC Invert Chiller x 2T

If you need information about us, please contact us now!!

CHMER is dedicated to advancing the technology and the quality of the EDM industry in Taiwan and worldwide EDM market.