G53S
Wire Cut EDM
1.High level of flexibility with low running cost.
2.The ideal machines for any EDM work shop.
3.In Submerged condition,maximum height of work-piece recommended is Z stroke minus 45mm.
Technical data
X, Y Axis Travel
U, V, Z Axis Travel
Max. Size of Workpiece
Max. Work Piece Weight
Outside Dimension (WxDxH)
Machine Weight
500x300mm
60x60x220mm
825x600x215mm
400kg
2720x2350x2100mm
3195kg
Specification
Model | Unit | G53S |
---|---|---|
X, Y Axis Travel | mm | 500x300 |
U, V, Z Axis Travel | mm | 60x60x220 |
Max. size of work piece | mm | 825x600x215 |
Max. work piece weight | kg | 400 |
X Y Feed Rate | mm/min | Max. 800 |
Axis Drive System | - | AC Servo Motor |
Wire Diameter Range(Standard) | mm | φ0.15-0.3 (φ0.25) |
Max. Wire Feed Rate | mm/sec | 300 |
Wire Tension | gf | 300-2500 |
Taper Angle | - | ±14.5°/80 (wide-angled nozzle, DA+DB=15mm) |
Outside Dimension(WxDxH) | mm | 2290x2270x2130 |
Machine Weight | kg | 3195 |
Tank Capacity | L | 650 |
G53S
Standard
- Paper Filter x 2PCS
- Diamond Guides x 2PCS
- Upper/Lower Flushing Nozzles x 2PCS
- Energizing Carbides x 2PCS
- Diamond Guide Remove Jig
- Brass Wire (DIA.0.25mmX5kg)
- Tools
- AC Power
- Alignment Jig
- Flushing Ion Exchange Resins(1PCS x 3L)
- Submerged Ion Exchange Resins(1PCS x 6L)
- Auto Data Recovery after Blackout
- Water Chiller (Flushing) x 1T
- Water Chiller (Submerged) x 2T
Option
- Swinging Panel
- 2-in-1 Transformer + AVR
- Auto Wire Threading(AWT)
- 30kgs Wire Feeder
- Auto Wire Chopper(30kg)
- DC Invert Chiller x 2T
If you need information about us, please contact us now!!
CHMER is dedicated to advancing the technology and the quality of the EDM industry in Taiwan and worldwide EDM market.