Wire Cut EDM

1.High level of flexibility with low running cost.

2.The ideal machines for any EDM work shop.

3.In Submerged condition,maximum height of work-piece recommended is Z stroke minus 45mm.

Technical data

X, Y Axis Travel
U, V, Z Axis Travel
Max. Size of Workpiece
Max. Work Piece Weight
Outside Dimension (WxDxH)
Machine Weight


Model Unit G32S
X, Y Axis Travel mm 360x250
U, V, Z Axis Travel mm 60x60x220
Max. size of work piece mm 725x560x215
Max. work piece weight kg 300
X Y Feed Rate mm/min Max. 800
Axis Drive System - AC Servo Motor
Wire Diameter Range(Standard) mm φ0.15-0.3 (φ0.25)
Max. Wire Feed Rate mm/sec 300
Wire Tension gf 300-2500
Taper Angle - ±14.5°/80 (wide-angled nozzle, DA+DB=15mm)
Outside Dimension(WxDxH) mm 2300x2300x2100
Machine Weight kg 2375
Tank Capacity L 590



  • Paper Filter x 2PCS
  • Diamond Guides x 2PCS
  • Upper/Lower Flushing Nozzles x 2PCS
  • Energizing Carbides x 2PCS
  • Diamond Guide Remove Jig
  • Brass Wire (DIA.0.25mmX5kg)
  • Tools
  • AC Power
  • Alignment Jig
  • Flushing Ion Exchange Resins(1PCS x 3L)
  • Submerged Ion Exchange Resins(1PCS x 6L)
  • Auto Data Recovery after Blackout
  • Water Chiller (Flushing) x 1T
  • Water Chiller (Submerged) x 1T


  • Swinging Panel
  • 2-in-1 Transformer + AVR
  • Auto Wire Threading(AWT)
  • 30kgs Wire Feeder
  • Auto Wire Chopper(30kg)
  • DC Invert Chiller x 2T

If you need information about us, please contact us now!!

CHMER is dedicated to advancing the technology and the quality of the EDM industry in Taiwan and worldwide EDM market.